Book of abstracts
1. Development trends of the ORLEN Unipetrol Group
Assoc. Prof. Ing. Tomáš Herink, Ph.D., ORLEN Unipetrol
2. Hydrogen strategy of the Czech RepublicIng. Petr Mervart, Commissioner for Hydrogen Strategy of the Minister for Industry and Trade
3. Local motorism from the perspective of Green DealProf. Ing. Jan Macek, DrSc., CTU in Prague
4. Hydrogen in the Czech Republic and its role in the futureProf. Dr. Ing. Karel Bouzek, UCT Prague
5. Decarbonisation options - hydrogen in chemistry and energyProf. Ing. Kamil Wichterle, Ph.D., VŠB TU Ostrava
6. Current activities of the Association of the Chemical Industry of the Czech RepublicIng. Ivan Souček, CSc., SCHP
7. Mathematical modelling of chemical processes Prof. RNDr. Ivo Nezbeda, DrSc., Jan Evangelista Purkyně University, Ústí nad Labem
ORAL PRESENTATIONS – LECTURES
INORGANIC TECHNOLOGY
IT1 Study of stability of the platinum and platinum alloy catalyst for pem fuel cells
Mališ J., Čobejová O., Jedlička T., Paidar M., Bouzek K., Prague
IT2 Gas diffusion electrode hydrophobicity: A factor influencing the efficiency of alkaline fuel cell
Zejmon M., Paidar M., Bouzek K., Prague
IT3 Ni-Fe-W Catalyst for alkaline water electrolysis
Záchenská J., Zemanová M., Bratislava
IT4 Influence of the catalyst particles size and crystalline phase on electrocatalytical performance of Co0.83Ni0.17Se2 for oxygen reduction reaction in alkaline fuel cell
Hronová D., Hnát J., Bouzek K., Prague
IT5 Model of alkaline water electrolysis in connection with renewable sources of energy
Denk K., Paidar M., Hnát J., Bouzek K., Prague
IT6 Differences in composition of naples yellow and synthesis of its main phases
Dohnalová Ž.1, Luxová J.1, Šulcová P.1, Šefců R.2, Antušková V.2
1Pardubice, 2Prague
IT7 19th CENTURY PIGMENT SrCrO4 – Synthesis and characterisation
Fejk J., Dohnalová Ž., Pardubice
IT8 Synthesis and characterization of perovskite pigments via different methods
Hroch J., Dohnalová Ž., Pardubice
IT9 Laser direct writing into GE-AS-S glassy system
Samsonova E., Kutálek P., Knotek P., Černošková E., Schwarz J., Pardubice
IT10 Increasing the stability of ferrate (VI) by encapsilation
Benköová M., Mališová E., Híveš J., Bratislava
IT11 Modelling of transport of deacidification components in an acid paper
Danielik V., Králik M., Ambrová M., Jurišová J., Fellner P., Vizárová K., Bratislava
IT12 Applicability of Carman-Kozeny equation in prediction of GDL permeability
Prokop M., Drakselová M., Bouzek K., Prague
MATERIALS ENGINEERING
MI1 Preparation and application of new N-coordinated organogallium compounds
Milasheuskaya Y., Jambor R., Němec P., Bouška M., Pardubice
MI2 Antibacterial activity of silver nanoparticles grafted onto plasma treated pet: effect of preparation method and shape of NPs
Řezníčková A., Nguyenová H.Y., Lacmanová V., Michalcová A., Průša F., Vokatá B., Švorčík V., Slepička P., Prague
MI3 New alloys from the sea
Novák P., Tsepeleva A., Michalcová A., Msallamová Š., Vlášek J., Benediktová D., Kopeček J., Prague
MI4 High-entropy alloys – properties as a result of their composition and preparation route
Průša F., Strakošová A., Kratochvíl P., Thürlová H., Prague
MI5 Structure modification of aluminium alloys with a natural combination of dopants using rapid solidification technology
Tsepeleva A., Novák P., Prague
MI6 Magnesium alloys with high ignition temperature for the aerospace industry
Hosová K., Kubásek J., Vojtěch D., Prague
MI7 COPPER-METAPHOSPHATE glasses modified by zinc or calcium
Brázdová S., Pardubice
PHARMACEUTICAL TECHNOLOGY
SP1 Mechanisms of tablet disintegration and drug release – towards the deeper understanding of the dissolution process
Zámostný P., Bittner R., Dufková K., Römerová S., Prague
SP2 The importance of surface free energy in the formulation of solid dispersions
Školáková T., Smržová D., Pekárek T., Zámostný P., Prague
SP3 Technology transfer for the dry granulation process aiming at keeping identical ribbon properties
Petr J., Zámostný P., Stasiak P., Prague
SP4 Effect of the mixing strategy on the uniformity of powder mixtures for direct compression
Römerová S., Novák D., Zámostný P., Prague
SP5 Is crystallization a black box
Gabriel R., Bártová A., Opava
SP6 Process analytical technology for crystallization - all in one
Bártová A.1,2, Gabriel R.1, Šahnić D.3, 1Opava, 2Olomouc 3Zagreb
SP7 Corticosteroid-loaded PLGA nanospheres for macrophages targeting: a tool for inflammation management
Boltnarová, B., Kubačková, J., Holas, O., Pávek, P., Hradec Králové
SP8 Application of fused deposition modeling in preparationof carbohydrate-based drug forms
Matzick K., Slezáková B., Macháčková J., Komersová A., Pardubice
OIL, PETROCHEMICALS, BIOFUELS
OP1 Integrated production of olefins and jet fuel from waste polypropylene
Ondrovič T., Mikulec J., Slezáčková M., Peller A., Hájeková E., Bratislava
OP2 Chemical recycling of polyolefins: a case study on LDPE conversion into light olefins and aromatics
Inayat A.1, Inayat A.2, Schwieger W.2, Lestinsky P.1,
1Ostrava, 2Erlangen Nuremberg
OP3 Influence of oil addition from plastic depolymerization on product yield structure in fluid catalytic cracking
Pšenička M., Vráblík A., Vondrášková K., Ústí nad Labem
OP4 Comparative study of acidic heterogenenous catalysts used for esterification of free fatty acids to fame/faee
Kaule P., Nguyen Thi H.T., Polák L., Čermák J., Šícha V., Ústí nad Labem
OP5 Epoxidation of oils and esters of higher fatty acids – monitoring of reaction
Hájek M., Kocián D., Straková A., Douda M., Bělava O., Pardubice
OP6 The influence of residue sodium IONS and different anions in mixed oxides on transesterification of vegetable oils
Kocián D.1, Hájek M. 1, Malina J. 1, Frolich K. 1, Mališová M.2
1Pardubice, 2Bratislava
OP7 Estimation of trace elements in industrial wastewater at an oil refinery in Yemen (Aden refinery)
Al Sabbari A.S., Republic of Jemen
OP8 Quality control of diesel, gasoline, jet fuel and lubricants with laboratory and process near infrared spectroscopy
Libánský M., Kadenkin A., Metrohm AG spectroscopy competence center2
1Prague, 2Herisau, Switzerland
OP9 Environmentally acceptable lubricants for maritime applications
Stavárek P.1, Večeř M.2, Zelenka L.3, Armada S. 4, Stenerud G. 4, Bernat S. 4
1Prague, 2Ostrava, 3Jersín, 4Trondheim, Norway
OP10 The future of jet fuel as an important refinery product
Kittel H., Horský J., Prague
CESTOVNÍ MAPA VÝVOJE CHEMICKÉHO PRŮMYSLU V ČR VE SVĚTLE EGD
ZD1 SUSCHEM CZ a Green Deal - aktivity
Ladislav Novák, SUSCHEM CZ
ZD2 Pohled BASF na Strategii pro udržitelnost v oblasti chemických látek
Boris Gaspar, zástupce BASF SE a BASF spol s.r.o.
ZD3 EGD a související legislativa, pohled MEP
Ondřej Knotek, Evropský parlament
ZD4 Strategie pro udržitelnost v oblasti chemických látek- vliv na vývoj legislativy (EU a ČR)
Karel Bláha, Ministerstvo životního prostředí
ZD5 Novinky v EGD z pohledu MPO
Pavlína Kulhánková, Ministerstvo průmyslu a obchodu
ZD6 Chemická recyklace plastů ve světle EGD
Jiří Reiss, ČTP Plasty
ZD7 Implementace Strategie pro udržitelnost v oblasti chemických látek v roce 2021
Ivan Souček, Svaz chemického průmyslu ČR
ZD8 Nákladová cena vodíku z OZE
Martin Šilhan, SUSCHEM CZ, Centrum výzkumu Řež
ZD9 Připravovaná Strategická výzkumná agenda
Antonín Mlčoch, SUSCHEM CZ, Centrum výzkumu Řež
ECONOMICS OF CHEMICAL INDUSTRY
E1 Impact of energy price development on chemical industry
Souček I., Suchý J., Prague
E2 Modelling steam methane reformer operation with hydrogen-enriched feedstock
Hoppej, D., Variny M., Kondáš R., Bratislava
E3 Use of digitalization in chemical enterprises
Vávra J., Spáčil P., Bakeš O., Pardubice
E4 Changes in managing human resources in the post covid era in the Czech Republic
Charvátová D., Botek M., Prague
E5 Mathematical modeling of heat and mass transfer in a rotary kiln
Kozakovic M.1,3, Cada Jan1, Kokavcova Anna1, Havlica J.1,2, Huchet F.3
1Ústí nad Labem, 2Prague, 3Bouguenais, France
E6 Importance of an eco-label for the customer
Branská L.1, Paták M.1, Pecinová Z.1, Kocmanova A.2, 1Pardubice, 2Brno
E7 The accomplishment of the digital well-being in companies
Botek M., Charvátová D., Dvořáková Z., Prague
E8 Decent work in the green economy
Dvorakova, Z.1, Polents, I.2, 1Prague, 2Pilsen
E9 Productive economic view of the bakery industry
Strachotová D., Kutnohorská O., Prague
E10 Consumer Behaviour in the German Bread Market
Kutnohorská O., Strachotová D., Prague
SUSCHEM - ČTPPlasty
PL1 Chemická recyklace
Jiří Reiss, ČTP Plasty
PL2 Registrace produktů chemické recyklace
Pavlína Kulhánková, MPO
PL3 Systém sběru a recyklace odpadních plastů
David Lukáč, EKO-KOM
PL4 Plazmové zplyňování odpadů
Petr Břenek, PGP Terminal, a.s.
PL5 Termochemická recyklace plastového odpadu
Jaroslav Pátek, ENRESS
PL6 Termolýzní zpracování uhlíkatých odpadů ve světle cirkulární ekonomiky
Karel Prokeš, Agmeco LT s.r.o.
PL7 OPTIMUS – efektivní recyklace plastů
Eduard Wipplinger, Plastoil
PL8 Chemická recyklace
Pavel Kuráň, Pavel Krystyník, Jan Hubáček, UJEP/Orlen UniCRE
POLYMERS, COMPOSITES
PC1 Goals and challenges of rubber sustainability
Brejcha J.1,2, Hrdlička Z.2, Krmela J.2, Beneš L.2, Hittlová M.2
1Ústí nad Labem, 2Prague
PC2 Alternative bio-based plasticizers for rubber industry
Hrdlička Z.1, Brejcha J.1,2, Hittlová M.1, Alexová C.1, 1Prague, 2Ústí nad Labem
PC3 The influence of mastication and ageing on gel content of natural rubber
Čadek D., Foitlová A., Kuta A., Prague
PC4 Influence of processing methods on the behavior of waste rubber powder-modified rubber matrix
Hittlová M.1, Hrdlička Z.1, Brejcha J.1,2, Ustinov O.1, Pradas A.1
1Prague, 2Ústí nad Labem
PC5 Materials recycling in the production of porous polymeric molds
Pokorný J.1, Motyčková J.1, Riedelová K.1, Sedlářová I.2, Urbánek J.1, Blažek Z.3, 1Kralupy nad Vltavou, 2Prague, 3Svitavy
PC6 Branched polyolefins as polymer specialities
Kotyza O., Sokolohorskyj A., Šofrová V., Musil V., Merna J., Prague
PC7 Organic photoactive materials for polymeric matrixs
Kubáč L.1, Kořínková R.1, Černý J.1, Trousil V.1, Pummerová M.2, Zetková K.3
1Rybitví, 2Zlín, 3Pardubice
PC8 Catalytic activity of N-donor stabilized TIN(II) cations in rop of L-LACTIDE
Novák M., Milasheuskaya Y., Turek J., Růžičková Z., Podzimek Š., Jambor R., Pardubice
PC9 Preparation of strong cation exchange resin on the base of styrene-divinylbenzene copolymer for water treatment
Skálová H., Jelínek L., Štěpánková Z., Prague
PC10 Absorption-desorption isotherms as a tool for estimation of conditions for after-treatment of deacidified cellulosic objects
Králik M., Vizárová K., Vajová I., Tiňo R., Guzikiewiczová E., Bratislava
ORGANIC TECHNOLOGY
OT1 Development of new technology for caprolactam purification
Trejbal J., Zapletal M., Prague
OT2 Available methods enabling chemical utilization of anthropogenic CO2 for production of cyclic carbonates using homogeneous non-metallic catalysts
Weidlich T., Kamenická B., Pardubice
OT3 Salts of N-heterocyclic compounds as catalysts in cyclic carbonates production
Zítová K., Zelinková K., Vyskočilová E., Prague
OT4 Tezacaftor - synthesis optimization of the first intermediates
Hašková L., Máčal L., Vyskočilová E., Ridvan L., Prague
OT5 A method for pre-treatment of waste plastic pyrolysis oil allowing the evaluation by pyrolysis gas chromatography
Le T. A., Karaba A., Patera J., Zámostný P., Prague
OT6 Poem and reality
Hrdina R., Burgert L., Kalendová A., Machalický O., Pardubice
OT7 Hydrogenation of 2-Phenylacrylic ACID
Kotova M., Bachmaier J., Vyskočilová E., Červený L., Prague
BIOTECHNOLOGY AND BIORAFINERY
BI1 The fungus monascus, production of secondary metabolites and their use
Husáková M., Patáková P., Prague
BI2 Stability and antioxidant activity of Monascus pigments in complex red yeast rice extracts
Husáková M., Patáková P., Prague
BI3 Genomic and functional analysis of polyhydroxyalkanoates producer Rhodospirillum rubrum DSM 467
Jureckova K., Nykrynova M., Slaninova E., Bezdicek M., Obruca S., Skutkova H., Sedlar K., Brno
BI4 Diversity of schlegelella thermodepolymerans revealed with nanopore sequencing
Sedlar K., Musilova J., Kourilova X., Bezdicek M., Obruca S., Brno
BI5 Processing of animal by-products for biotechnological production of value-added commodities
Branska B., Solansky M., Patakova P., Melzoch K., Prague
BI06 Optimization of cultivations of carotenogenic yeasts on poultry waste substrates
Holub J., Chujanov O., Szotkowski M., Šimanský S., Schildová V., Dzurická L., Márová I., Brno
BI7 Optimization of extraction, purification and stabilisation of biologically active compounds from yeast and microalgae biomass
Šimanský S., Szotkowski M., Holub J., Obračaj H., Dzurická L., Schildová V., Márová I., Brno
BI8 Study of polyhydroxyalkanoate production by new thermophilic isolates of the genus aneurinibacillus
Pernicová I., Kouřilová X., Řeháková V., Sedláček P., Obruča S., Brno
WASTE TREATMENT, WATER PROTECTION
WT1 Removal of environmentally harmful pharmaceuticals via adsorption on activated carbon
Pavúková D., Fašková L., Mališová E., Gál M., Híveš J., Bratislava
WT2 Ferrates as a degradation tool for pollutants
Fašková L., Pavúková D., Mališová E., Štibrányi L., Híveš J., Bratislava
WT3 Microplastics – fast and reliable identification using correlative spectro-microscopy
Danylo I., Marvan P., Sofer Z., Kofroňová J., Vurm R., Veselý M., Prague
WT4 Use of transition metal oxides as catalysts in AOPs for water treatm
Mašín P.1, Kroužek J.2, Hendrych J.2, Tišler Z.3, 1Dřetovice, 2Prague, 3Litvínov
WT5 ENREGAT's large research infrastructure has a track record of succes
Grycová B., Obalová L., Ostrava
AIR PROTECTION, TECHNOLOGIES FOR SOIL DECONTAMINATION
AP1 New non-porous membranes for flue gas purification
Stanovsky P.1, Zitkova A.1, Gándara B.C.2, McKeown N. 2, Jansen J.C.3, Friess K.4, Izak P.1, 1Prague, 2Edinburgh, Midlothian, UK, 3Rende, Italy
AP2 Advanced mixed metal oxides in catalytic oxidation of VOCs in air
Kroužek J.1, Rippelová V.1, Hrdličková P.1, Hibschová J.1, Solodkov M.1, Tišler Z.2, 1Prague, 2Litvínov
CHEMICAL PROCESSES AND DEVICES
CHP1 Economic aspects of heat pump integration in thermally coupled hybrid separation
Šulgan B., Labovská Z., Bratislava
GAS, COAL, FUEL
GC1 CO-firing multiple fuels in vojany thermal power plant
Variny M.1, Stričík M.2, Štofová L.2, 1Bratislava, 2Košice
GC2 CO-combustion of sewage sludge in the heating plant
Hlaváček O., Šrámek V., Prague
GC3 C3MR LNG Process Optimization: An Enviro-Economic Study
Furda P., Variny M., Bratislava
GC4 C3MR LNG Process Optimization: Parallel Genetic Algorithm Interface
Furda P., Variny M., Bratislava
POSTERS
AIR PROTECTION, TECHNOLOGIES FOR SOIL DECONTAMINATION
P1 Composite of biochar and nano zero-valent iron for remediation of metal-contaminated soil:simulated soil profile conditions
Vítková M., Ouředníček P., Hudcová B., Mitzia A., Prague
BIOTECHNOLOGY AND BIOREFINERY
P2s Determination of methodology for monitoring biofilm formation of filamentous microscopic fungi
Kulišová M., Kolouchová I., Prague
P3s SIDEROPHORES – the active component of the biopesticide preparation
Mach J., Prague
P4 Coupled production of aroma compounds by two strains of microorganisms using membrane hybrid systém
Mihaľ M., Červeňanský I., Markoš J., Bratislava
P5s Optimisation of separation 2-methylbutanol-1-ol and 3-methylbutanol-1-ol from fusel oil by rectification
Báleš V., Timár P., Bratislava
P6s Separation of butanol isomers from multicomponent mixture
Timár P., Báleš V., Bratislava
P7s Valorisation of waste materials based on lignocellulose
Hrabalová V., Kouřilová X., Pernicová I., Nováčková I., Pořízka J., Obruča S., Brno
P8s Effect of hydrodynamic conditions in a model of cultivation for a hybrid tubular photobioreactor producing microalgal biomass
Bělohlav V., Jirout T., Krátký L., Prague
P9 Chemical composition of the essential oil of Perilla frutescens
Sitkey V.1, Dočolomanský P.1, Čičová I.2, 1Bratislava, 2Piešťany
P10 Investigation of Antibodies Aggregation and Stability of Aggregates
Rupčíková V., Molnár T., Kurák T., Polakovič M., Bratislava
P11s Production of biopolymers by bacterium Azotobacter vinelandii and its encapsulation
Černayová D., Sukeník M., Slaninová E., Sedláček P., Obruča S., Brno
P12s Biotechnological production of PHA copolymers in cyanobacteria
Sedrlova Z., Slaninova E., Obruca S., Brno
P13s Towards sustainable production of biopolymers using thermophilic microorganisms
Kouřilová X., Pernicová I., Musilová J., Vidláková M., Sedlář K., Obruča S., Brno
P14 Extremophilic microorganisms of thermal radon springs
Timkina E., Jarošová I., Maťátková O., Prague
P15s Involvement of polyhydroxyalkanoates in the adaptation process of bacterial strain Cupriavidus necator
Nováčková I., Hrabalová V., Slaninová E., Sedláček P., Obruča S., Brno
P16 Amino acid isolation from animal waste hydrolysates
Rousková M., Šabata S., Hanika J., Sýkorová A., Šolcová O., Prague
P17 Amino acid isolation from animal waste hydrolysates
Rousková M., Šabata S., Hanika J., Sýkorová A., Šolcová O., Prague
P18s Study of the influence of aeration and light / darkness on polyhydroxyalcanoate production in rhodospirillium rubrum bacteria
Slaninová E., Rubanová B., Černayová D., Nováčková I., Havlíková M., Mrázová K., Sedláček P., Obruča S., Brno
P19 Saccharide profile of green powders and its influence on probiotic growth
Hoová J., Skoumalová P., Strečanská P., Márová I., Brno
P20s Comparison of valuable active compounds from red yeasts and conventional sources
Uhlířová R., Skoumalová P., Márová I., Brno
ECONOMICS OF CHEMICAL INDUSTRY
P21s Selected options to increase the efficiency of a steam methane reformer
Hoppej D., Variny M., Kondáš R., Bratislava
P22s Lowering the energy and water footprint of a laundry facility
Čižmár M., Variny M., Bratislava
P23s Assessing variants of low-grade heat valorization in the refining industry
Rybár P., Variny M., Bratislava
P24 Industrial packaging management in the circular economy model
Paták M.1, Hromadníková K.1, Branská L.1, Kocmanová A.2, 1Pardubice, 2Brno
P25 The dynamics of the production of thermal insulation materials used in the construction industry
Vytlačil D., Prague
P26 Capacity calculations using quantitative methods in chemical operational management
Košťálek J., Koťátková Stránská P., Prague
GAS, COAL, FUEL
P27s Conceptual design of gasifier processing heavy oil fractions
Podolský S., Variny M., Bratislava
P28s Short-term ageing of bituminous binders with using method RCAT with mastic
Matoušek L., Jíša P., Černý R., Litvínov
P29 Energy and environmental aspects of industrial heat saving in various situations
Variny M., Kšiňanová M., Furda P., Bratislava
CHEMICAL PROCESSES AND DEVICES
P30s The verification of material flow in a brewery malt tank using the dem method
Likavčan A., Peciar M., Peciar P., Bratislava
P31s Changes in the humidity of spruce chips during storage and their impact on alkali consumption in impregnation step of pulp production
Kohútová M.1, Peciar P.1, Kepl J.2, Pisko R.2, Němeček M.2, Fekete R.1
1Bratislava, 2Štětí
P32 Experimental and modelling studies on the photocatalytic generation of hydrogen during water-splitting over a commercial tio2 photocatalyst p25
Filip Edelmannová M.1, Ballari M.M.2, Přibyl M.3, Kočí K.1
1Ostrava, 2Santa Fe, Argentina, 3Prague
P33 Labolatory equipment for design and scale up of refining processes
Korpas J., Leštinský P., Carbol L., Wichterle K., Ostrava
P34 Empirical model for prediction of visbreaking product yields
P. Jíša, R. Černý, Litvínov
INORGANIC TECHNOLOGY
P35 Verification of the suitability of ldh for stabilization and deacidification of acidic paper information carriers
Jurišová J., Malečková S., Guzikiewiczová E., Vizárová K., Danielik V., Králik M., Bratislava
P36s Catalyst deposition on large electrodes in membrane alkaline water electrolysis
Denk K.1, Łuba M.2, Hnát J.1, Žitka J.1, Paidar M.1, Bouzek K.1
1Prague, 2Olsztyn, Poland
P37 La Palma volcano ashes as suitable green catalyst
De Paz Carmona H.1,2, Hidalgo Herrador J.M.1, Borges Chinea M.E.2, Tišler Z.1, Esparza Ferrera P.2, Michálkova M. 1, Hradecká I. 1, Sharkov N.1
1Ústí nad Labem, 2Tenerife, Spain
P38s Comparison of nitrogen and argon physisorption applied to faujasite zeolite
Strejcová K., Peroutková K., Tišler Z., Svobodová E., Litvínov
P39s Numerical model of pem type fuel cell with bipolar plates produced by stamping of the composite coated steel sheets
Hala M., Kodým R., Prokop M., Paidar M., Bouzek K., Prague
P40s Performance and durability of membrane alkaline water electrolyzer with anion selective membranes and non-platinum catalysts
Plevová M., Hnát J., Žitka J., Bouzek K., Prague
P41s Degradation of organic micropollutants in wastewater by ferrate-zeolite pellets
Červenková A., Mališová E., Benköová M., Híveš J., Bratislava
P42s Protective layers on iron samples and comparison to historical iron artefact
Roman Košťúr R., Zemanová M., Bratislava
P43 Experimental studies of selected thermochemical reactions
Lhotka M., Bernauer M., Fíla V., Prague
MATERIALS ENGINEERING
P44s Thermal insulation composite blocks based on geopolymer
Kohout J.1,2, Soukup A.1,2, Kohoutová E.1,2, Koutník P.1, Hájková P.1,2
1Ústí nad Labem, 2Liberec
P45 Analysis of ecological energetic materials
Olšovský M.1, Krištof M.1, Kuna P.2, Budzák Š.3
1Dubnica nad Váhom, 2Brno, 3Bynská Bystrica
P46 Catalytic properties of ni-cu mixed oxides deposited on stainless steel meshes by plasma jet sputtering
Jirátová K., Soukal P., Babii T., Balabánová J., Koštejn M., Čada M., Maixner J., Topka P., Hubička Z., Kovanda F., Prague
P47s Antimicrobial activity of silver nanoparticles synthesized by green approach
Miškovská A., Čejková A., Prague
P48s Properties of the CoCrFeNiMnXAl20-X (X = 5, 10 and 15 at.%) high entropy alloys prepared of mechanical alloying and spark plasma sintering
Thürlová H., Průša F., Prague
P49s Hydrogen trapping and embrittlement of 3D-printed Ti-6Al-4V alloy
Kačenka Z., Roudnická M., Ekrt O., Vojtěch D., Prague
P50s Carbidation of al2o3 supported co and fe catalysts for fischer-tropsch synthesis and their characterization
Svobodová E., Gholami Z., Tišler Z., Litvínov
P51s New approaches preventing passivation in monitoring of enviromental organic pollutants
Stránělová E., Michalcová A., Kratochvíl B., Prague
P52s Influence of al content on properties of cocrfenialx high-entropy alloys prepared by mechanical alloying and spark plasma sintering
Strakosova A., Riedl J., Průša F., Prague
P53s Structure and properties of ti-25nb-4ta-8sn alloy prepared by selective laser melting
Voňavková I., Průša F., Vojtěch D., Prague
P54s Determination of the optimal composition of the new hydraulic binder prepared from metakaolin, anhydrite and lime
Pulcová K., Šídlová M., Šulc R., Formáček P., Škvára F., Prague
P55s Influence of the addition of various types of mineral admixtures on the alkali-silica reaction in concrete
Mauermann L., Šídlová M., Šulc R., Pulcová K., Prague
P56s Development of biodegradable zinc-magnesium-silicon alloys by powder metallurgy processes
Nečas D., Kubásek J., Prague
P57s Properties of hydraulic binder prepared from metakaolin, anhydrite and lime
Šulc R., Škvára F., Šídlová M., Trefný J., Králová K., Pulcová K., Prague
P58s Innovative preparation of CoCrFeNi-based high-entropy alloys
Kratochvíl P., Průša F., Prague
P59s Mineral admixtures reactivity determination
Doležal T., Šídlová M., Šulc R., Pulcová K., Prague
P60 Preparation and description of porous silver electrode dedicated for detection of organic pollutants
Michalcová A., Stránělová E., Kratochvíl B., Prague
P61s Porosity of the different rocks in relation to capturing/moving of gases and liquids
Řimnáčová D., Vöröš D., Natherová V., Přikryl R., Lokajíček T., Prague
P62 High-temperature oxidation of the additively manufactured 1.2709 maraging steel
Strakosova A., Vojtěch D., Prague
P63 Aplikace iontových kapalin k úpravě textilu pro ochranu pokožky proti UV záření
Fojtášková J., Obalová L., Ostrava
P114 Coupling of matematical simulation and metal 3D printing into an useful tool for troubleshooting in chemical technology
Skala M., Kolda J., Pátý M., Prague
OIL, PETROCHEMICALS, BIOFUELS
P64s Carbon capture in steam methane reforming through techno-economic, safety and environmental optics
Janošovský J., Šandor R., Mišún P., Řežucha M., Jelemenský Ľ., Bratislava
P65s Preparation of bioethylene and biopropylene from waste fat and rapeseed oil
Babor M., Tišler Z., Skálová R., Hidalgo Herrador J. M., Ústí nad Labem
P66 Two stage catalytic cracking of hdpe in the presence of hzsm-5 and γ-alumina
Vasilkovová B., Hájeková E., Vatrt M., Hudec P., Bratislava
P67 Influence of water addition on the activity of MgAl catalyst in Aldol Condensation of Furfural with Acetone in flow-through reactor
Tišler Z., Vondrová P., Skuhrovcová L., Strejcová K., Svobodová E., Peroutková K., Litvínov
P68s Evaluation of the residual fraction by hot filtration
Schlehöfer D., Vráblík A., Ústí nad Labem
P69s Comprehensive multi-criteria process design methodology
Kraviarová D., Janošovský J., Bratislava
P70 Recycling of hdpe using combination of natural clinoptilolite and hzsm-5
Vasilkovová B., Hájeková E., Vatrt M., Hudec P., Bratislava
P71s Pyrolysis of plastics: Dehalogenation via stepwise pyrolysis and metal sorbents
Hubáček J., Lederer J., Kuráň P., Kašpárek A., Ústí nad Labem
P72 Comparison of sustainability of camelina based biodiesel and hydrotreated fuel
Slezáčková M., Mikulec J., Peller A., Hájeková E., Bratislava
P73 Two-steps catalytic decomposition and deoxygenation of lignin over acid and difunctional catalysts
Hudec P., Horňáček M., Mikulec J., Peller A., Blaško J., Kubinec R., Bratislava
P74 Novel sulfonated ionic liquids as effective catalysts for mild esterification to ethylester biodiesel
Nguyen Thi H. T., Kaule P., Koutecká J., Šícha V., Čermák J., Ústí nad Labem
ORGANIC TECHNOLOGY
P75 Study of specific properties of cobalt catalyst for applying in a new large-scale capacity unit for the cyclohexylamine production
Valeš R., Krupka J., Prague
P76s Ce-modified Beta zeolites as catalysts for β-pinene oxide isomerization
Přibylová P., Paterová I., Gorlova O., Červený L., Prague
P77 A novel chiral porous polymer networks – possible sorption of chiral substances
Vrbková E., Vyskočilová E., Havelková L., Bashta B., Sedláček J., Prague
P78 Catalytic oxidation of cellulose to formic acid in the presence of vanadium catalysts
Soták T., Fulajtárová K., Gašparovičová D., Horváth B., Magyarová Z., Bratislava
P79s Catalytic preparation of cyclopentyl ethyl ether from primary alcohols
Magyarová Z., Hronec M., Lopatka P., Soták T., BRatislava
P80 Catalytic conversion of ethanol into valuable alkenes
Horváth B., Soták T., Gašparovičová D., Fulajtárová K., Bratislava
P81s Reduced sensitivity RDX and HMX crystallized and spheriodized in propylene carbonate
Skácel R., Šabach J., Zikmundová M., Kožená V., Kubíček M., Fryš O., Pardubice
P82s Chemical transformations of plastic waste and biomass – monitoring and product assessment
Midula P.1, 2, Kuráň P.1, Pilnaj D.1, Burdová H.1, Oravová L.1, Hubáček J.1, Adamec S.1, 1Ústí nad Labem, 2Banská Bystrica
POLYMERS, COMPOSITES
P83 Comparison of properties of E-SBRs from different manufacturers
Kadeřábková A., Nováková M., Prague
P84s Rheology behaviour of biodegradable materials: potato thermoplastic starch/ natural rubber/ epoxidized natural rubber blends
Cai Z., Čadek D., Kuta A., Prague
P85 CO2 adsorption on amine-functionalized periodic mesoporous silicaand organosilicas
Setnickova K., Sabata S., Strasak T., Soukup K., Prague
P86s Preparation and application optiopns of lignin-based nanosystems
Maršík D.1, Thoresen P.P. 2, Masák J.1, Rova U. 2, Christakopoulos P.2, Matsakas L.2, 1Prague, 2Luleå, Sweden
P87s Sintering of PTFE-PEEK polymer blend in air atmosphere
Melichar J., Foitlová A., Mészáros M., Steiner V., Čelákovice
SYNTHESIS AND PRODUCTION OF DRUGS
P88 Drugs production by uniaxial compaction of powder material
Peciar P., Guštafík A., Jezsó K., Fekete R., Peciar M., Bratislava
P89s Testing the paste properties in the meaning of liquid migration
Uličná M., Fekete R., Peciar M., Bratislava
P90s Dependence of tablet strength on granulate properties
Čierny M., Macho O., Gabrišová Ľ., Fekete R., Bratislava
P91s Derivatization of amino acids – the tool for the medicinal diagnostics of human disorders
Sekerová L., Sedlák O., Mikoška M., Syslová K., Prague
P92s Synthesis and fluorescent properties of symmetrical bis(diphenylamino)-oligophenylenvinylenes
Teichmanová K.1, Imramovský A.1, Pauk K1., Vala M.2, Luňák S.2, 1Pardubice, 2Brno
P93 Development of nanoformulations for target delivery of obeticholic ACID
Iefremenko D., Boltnarova B., Lochman L., Holas O., Hradec Králové
P94s Effect of powder properties and compaction pressure on particle size of roll-compacted granulate
Švehla O., Zámostný P., Prague
P95 Bioactive analog of prostaglandin f2alpha - alfaprostol a laboratory Approach to key intermediates
Imramovský A., Pauk K., Pardubice
P96 Suzuki-Miyaura coupled stilbenes with various acceptors and donors
Pauk K.1, Imramovský A.1, Vala, M.2, Luňák, S.2, 1Pardubice, 2Brno
P97s RNA loaded plga nanoparticles for therapy of chronic inflammatory diseases
Mrózková N., Kubačková J., Holas O., Pávek P., Hradec Králové
P98 3D printing pharmaceutical HPMC-based filaments loaded with sodium alginate, pectin and chitosan prepared via hot-melt extrusion
Macháčková J., Matzick K., Skalická B., Komersová A., Pardubice
P99s Determination of Hansen solubility parameters of binary mixtures of polymers
Petříková E., Čerňová M., Patera J., Pardubice
P100s Functionalized nanofibers with immobilized liposome particles
Dzurická L., Skoumalová P., Márová I., Brno
P101s Predicting bulk density of binary powder mixtures from pure component properties
Komínová P., Smrčka D., Gajdošová M., Zámostný P., Prague
P102s Using of 3D-printed coating of matrix tablets for prevention of alcohol induced dose dumping effect
Skalická B., Matzick K., Macháčková J., Komersová A., Pardubice
P103s Solid displacement method to determine envelope density of roller compacted ribbons
Marinko N., Zámostný P., Prague
WASTE TREATMENT, WATER PROTECTION
P104 Reductive technology using raney alloy for quick and effective degradation of halogenated organic compounds in contaminated waters
Lacina P.1, Plotěný M.1, Hegedüs M.1,2, Lev J.1, Weidlich T.2, 1Brno, 2Pardubice
P105s Carbon-based materials prepared from waste animal bones by microwave pyrolysis for reduction of xylene from waste gase
Jankovská Z., Matějová L., Ostřanská M., Ostrava
P106 Low temperature microwave treatment of high-density polyethylene
Vaštyl M., Inayat A., Ostrava
P107 Energy and environmental aspects of industrial heat saving in various situations
Variny M., Kšiňanová M., Furda P., Bratislava
P108 Pyrolysis of miscanthus and influence of input raw material on the biochar quality
Klemencová K., Grycová B., Leštinský P., Ostrava
P109s Chemical pretreatment of industrial lignin by dissolving in organic solvents
Kafková V., Ondrejíčková P., Hruška M., Leopoldov
P110s Iron-biochar composites as perspective remediation agents
Hudcová B., Vítková M., Komárek M., Prague
P111s Removal of pharmaceuticals by electrooxidation processes
Melníková E., Pavúková D., Gál M., Bratislava
P112s Possibilities of hydrodebromination of brominated aromatic compounds using copper-based catalysts
Kamenická B., Weidlich T., Pardubice
P113 One-step direct catalytic sewage sludge liquefaction over a sulfided metal catalyst
Hidalgo Herrador J.M., Babor M., Brablíková M., Vráblík A., Ústí nad Labem